Lux is a pre-blended lime render with gentle texture and gentle patina in a range of colours made with natural hydraulic lime. For application to brick, stone & flint.
A base coat of DURO is applied to the wall surface. Duro is a natural hydraulic lime base coat that benefits from increased workability for easy application and benefits from control of water loss and even curing. Applied in one coat of 15mm on straight walls in unexposed locations. Applied in two coats up to 20mm for uneven walls or exposed locations.
Lux is the final coat which we supply in a range of natural colours. Applied in a single coat of 4mm. Lux sheds most rainwater for added durability and for a more consistent finish during wet weather.
Click here to view our price list
Duro is available from stock for collection from The Lime Centre or for next day delivery.
Lux Render has a short lead in time usually up to seven days.
Click here for delivery information
We are happy to work out quantities for you.
1 x 25kg bag Duro Basecoat covers 1.5m2 at 10mm thick.
1 x 25kg bag Lux Render covers 3.5m2 at 4mm thick.
The colour chart is a guide. To see the true colour please request a sample biscuit(s).
Lux Render is a pure lime render with fine texture and patina in a range of natural colours.
Applied onto brick, stone or flint with one or two base coats and a finish coat.
Lime Green Lux Render is a premixed render made with natural hydraulic lime.
Lux Render pure lime render is an extremely breathable, elastic and salt resistant render finish coat.
Designed for application over natural hydraulic lime base coats of Duro or Ultra, Lux Render is ideal for historic buildings.
Full range – please see Lux Render Colour Chart
(Sample colour biscuits available on request)
22kg bags. Store in a cool dry place and use within 8 months.
A 22kg bag of Lux Render pure lime render will cover approx. 31/2 m2 at 4mm thick. This does not include any allowance for wastage.
Add the whole bag of Lux Render into a drum or forced action mixer carefully avoiding creating excessive dust. Add 3.5 – 4.5 litres of clean water per bag. Mix for at least 10 minutes using drum mixer or use a mechanical whisk for 3 minutes. Stand for 10 minutes then mix again for 3 minutes adding further water, if required, to achieve workable consistency.
Scratch basecoat of Ultra or Duro with a ‘nail’ or ‘devil’ float once the basecoat has hardened but is still ‘green’. Scratch in a tight spiral action making light grooves. Dampen surface with mist spray in sufficient quantity to reduce excessive suction before applying Lux Render.
Apply Lux Render once the Duro or Ultra base coats have had sufficient time to cure. Usually 4 -7 days.
Lux Render should be applied to a straight, keyed, flat, dampened surface in a number of passes each approximately 1-2mm thick, up to a maximum of 4mm. Each pass or layer of Natural
Finish should be applied while the first pass of Lux Render is still damp but has had time to “pull in”.
Avoid over working. Use only a light mist spray if applying water to the surface of the finishing coat.
Finish with wooden float and leave open textured or dress with a sponge to close off and reveal the aggregate texture.
Temperatures: Lux Render lime render should be applied in temperatures above 5 degrees C below 30 degrees C
Prevent all coats from drying out too rapidly. Lightly spray each coat with water if it is hot or the product is drying out too quickly.
Protect from adverse conditions such as frost, rain and wind, ideally using a fully sheeted scaffold when outside.
Lux Render is a coloured render and does not require decoration but can be decorated with mineral paint. Allow approx. 24 days drying time before decorating with mineral paint. When decorating use breathable paints. Contact The Lime Centre for further advice or information about the full range of breathable paints.
For advice on our services and products call us on
01962 713 636